Home  ›  reset ink

How to Replace and Reset HP 2335 Printer Cartridge

To replace the cartridges in the HP Deskjet 2335 printer, make sure the printer is turned on and the input tray is loaded with plain white paper then follow these steps:
  1. Open the cartridge access door on the printer.
  2. Wait for the carriage to move to the center of the printer and become idle.
  3. Push down on the cartridge to be replaced to release it from the carriage.
  4. Pull the cartridge out of its slot.
  5. Take the new cartridge out of its packaging and remove the protective tape.
  6. Hold the cartridge with the contacts facing the printer and the nozzles facing down, and then slide it into the appropriate slot until it clicks into place.
  7. Repeat steps 3 to 6 for any additional cartridges that need to be replaced.
  8. Close the cartridge access door and wait for the printer to align the cartridges and print a calibration page.
  9. Dispose of the used cartridges in an environmentally responsible way.
Note that HP recommends using only genuine HP ink cartridges for the best print quality and reliability. Using non-HP cartridges or refilled cartridges may cause damage to the printer or result in poor print quality.
How to Replace and Reset HP 2335 Printer Cartridge
If your printer is giving a low-ink message, even though you think your cartridge still has some ink left, you can reset the ink levels. Once you reset the ink levels, you will be able to confirm whether the cartridge is really empty. If it is indeed empty, you can replace it with a new cartridge.
  1. Turn off your printer. Turn it back on and connect it to your computer using the USB cable.
  2. Click open the "Start" menu on your computer. Click on "Control Panel," and double-click "Printer and Faxes."
  3. Locate the icon of your printer along with its model number. Right-click this icon and click on "Properties" from the pop-up list.
  4. Click the "Services" tab and select "Service This Device."
  5. Select the "Estimated Ink Level" tab. Click the option "Reset Ink Level." The printer will then show a refreshed ink cartridge level for your printer.
Advertisement