How to Reset Canon G Series printers - G1010, G2010, G3000, G3010 and G4010

• min read

Table of Contents

How to Reset Canon G Series printers - G1010, G2010, G3000, G3010 and G4010. Canon G Series printer is a type of printer that was released in 2018 by issuing five types of G series printers, namely the G1010, G2010, G3000, G3010 and G4010 types. Different from other canon inkjets, this G series printer is equipped with an Ink Tank System, which means you can refill the ink without having to replace the cartridge.

HOW TO RESET CANON G SERIES PRINTERS

Here are the steps or steps taken for the Canon G Series reset process

First, turn off the printer
Insert paper into the printer tray to check the printer ink quality
Then press and hold the resume / stop button (red triangle) together with press the power button (ON / OFF)
Then release the resume / stop button (red triangle), but still press the power button
Then press the resume / stop button 5 times
And release all the buttons.
Then the green indicator light will automatically flash and wait until the green indicator light stays on without blinking.
When the indicator light turns on normally, press the resume / stop button again 5 times followed by pressing the power button 1 time.
After the print results come out, the indicator light will turn green, and press the Stop button again for 3 times by pressing the power button 1 time.
If the printed paper comes out with a half page print, then the reset process has been successfully carried out.
The final step, turn off the printer and turn it on again, then the printer is ready to be used again.

That is the information given about How to Reset Canon G Series Printer. Hopefully the information provided is useful and can increase your knowledge about the world of information and technology.