ZMedia Purwodadi
Home Counter Reset Reset manual resetter

Reset Canon MX308

• min read
Table of Contents

Step by step reset Waste Ink Absorber Full printer Canon MX308.

Run Service Mode:
  • Press and hold "Stop/Reset" and the "Power" buttons.
  • Release the "Stop/Reset" button.
  • Press the "Stop/Reset" button twice, (still holding the "Power" button).
  • Release the "Power" button. Your printer is now in Service mode
Reset Canon MX308
Reset:
  • Insert paper into the paper tray.
  • Press "Stop/Reset" button 4 times, this will select the clear waste ink counter function.
  • Press the "Power" button to turn off the printer.
If it does not work, try this after "Run Service Mode":
    • Insert paper into the paper tray.
    • Press "Stop/Reset" button 1 times then press Power botton, wait until printing finish.
    • Press "Stop/Reset" button 2 times then press Power botton. wait until printing finish.
    • Press "Stop/Reset" button 3 times then press Power botton.
    • Press "Stop/Reset" button 4 times then press Power botton.
    • Press the "Power" button to turn off the printer.
    • The printer will now work normally.